The CAS 30/9000/540 - S 2 R T815-PR2 6x6.1 Water Tender was created by reconstruction and modernization of the original model built on the chassis TATRA 815 PR2 and marketed under designation CAS 32 - T815.
The CAS 30 Water Tender is a firefighting vehicle designed to carry a fire brigade crew (1+3), equipment and extinguishing media to extinguish fires of highly flammable substances by application of water or foam, even in areas where water is lacking.
The vehicle can be used by ordinary fire & rescue brigades, at airports, in industrial factories, chemical plants, refineries, mines, warehouses of flammable substances, in areas with a high risk of fire hazard and in emergency situations.
The Water Tender is built on three-axle TATRA chassis with longitudinal frame, equipped with centrifugal fire pump with rated flow rate of 3000 lpm, 9000 litre water tank capacity, 540 litre foam concentrate tank capacity, roof monitor and hose reel with 60 metres of hose.
Length (without cable winch) | 8 510 mm |
Width | 2 500 mm |
Height | 3 350 mm |
Ground clearance below axle | 390 mm |
Fordability | 1 200 mm |
Operating weight | 12 950 kg |
Gross vehicle weight | 22 500 kg |
Model | TATRA T815-PR2 6x6.1 |
Engine model | TATRA T3-930.37 |
Engine output | 235 kW/2 200 min-1 |
Drive | 6x6 (front axle drive can be disengaged) |
Gearbox | mechanical, 10 forward gears, 2 reverse gears |
Brake system | independent brake systems: service, emergency, parking |
Electrical system voltage | 24 V (two batteries of 12 V 180 Ah) |
Fuel tank capacity | 150 l |
Maximum vehicle speed | 92 km/h |
Type | cab-over-engine, two-door, tilt cab |
Number of seats | 1 + 3 |
Material | frame made of aluminium profiles and covered with aluminium plates glued-on |
Water tank capacity | 9 000 l |
Foam concentrate tank capacity | 540 l |
Low-pressure system |
|
Rated flow rate | 3 000 l/min |
Rated working pressure | 1.0 MPa |
Rated suction lift | 3 m |
Maximum suction lift | 7.5 m |
High-pressure system |
|
Rated flow rate | 250 l/min |
Rated working pressure | 4.0 MPa |
Hose dimensions | DN 25/60 m |
Branchpipe | high-pressure, gun-type |
Rated flow rate | 200 l/min |
Rated pressure | 4.0 MPa |
Technical modifications reserved. 05/2016
(7045.28)
POPIS REKONSTRUKCE A MODERNIZACEPODVOZEK
Rám
Brzdová soustava
Vzduchová soustava
Palivová a výfuková soustava
Řízení
Ostatní
AGREGÁTY A NÁPRAVY
Motor
Spojka
Převodovka
Převod, přídavný převod, pomocný pohon
Přední náprava
Zadní náprava
Ostatní
KABINA ŘIDIČE
NÁSTAVBAKaroserie Přední skříň levá a pravá
Zadní skříň levá a pravá, skříň čerpacího zařízení
Boční panely
Rozmístění výbavy
Horní plošina
NÁDRŽENádrž na vodu
Nádrž na pěnidlo
ČERPACÍ ZAŘÍZENÍČerpadlo
Přiměšovací zařízení
Armatury
LAFETOVÁ PROUDNICE
ASANAČNÍ LIŠTA
ELEKTROINSTALACE
POVRCHOVÁ ÚPRAVAPředpovrchová úprava
Povrchová úprava karoserie Lakované díly
Foliované díly
Barevné provedení
Antikorozní úprava
|
Are you planning to buy new fire fighting equipment? We will be happy to help you with your choice. If you are going to issue an invitation for bids or just need more information before making an important decision, please contact us by fillling out a short form. We will reply as soon as possible. Thank you.