
The CAS 20/3200/210 - M 2 Z(R) MAN 4x4 Water Tender is designed to carry a fire brigade crew with accessories necessary for fire fighting interventions with application of water or foam using the low or high water pressure.
The fire superstructure is interconnected and controlled through the CAN (Controller Area Network) bus.
| Length (without cable winch) | 7 120 mm |
| Width | 2 550 mm |
| Height at curb weight | 3 300 mm |
| Ground clearance at G.V.W. | 330 mm |
Vehicle weights
| Service weight | 8 950 kg |
| Gross vehicle weight | 14 000 kg |
| Type | TGM 13.240 4x4 BL |
| Engine type | Diesel, supercharged, water-cooled engine |
| Engine output | 177 kW/2 300 min-1 |
| The engine complies with EURO 4 emission standard. | |
| Drive | 4x4 |
| Gearbox | mechanical, 9 forward gears, 1 reverse gear |
| Brake system | double-circuit air system, ABS |
| Electrical system voltage | 24 V (2 batteries of 12 V 140 Ah) |
| Fuel tank capacity | 140 l |
| Maximum vehicle speed | 100 km/h |
| Type | forward control, tilt cab |
| Number of seats | 1 + 5 |
| Water tank capacity | 3 200 l |
| Foam concentrate tank capacity | 210 l |
Low-pressure
| Rated water flow rate | 2 000 l/min |
| Rated working pressure | 1.0 MPa |
| Rated suction lift | 3.0 m |
High-pressure
| Rated water flow rate | 250 l/min |
| Rated working pressure | 4.0 MPa |
| Hose dimensions | DN 25/60 m |
| Branchpipe | gun type, allowing to control flow rate and discharge cone |
| Rated flow rate | 200 l/min |
Technical modifications reserved. 09/2008
(3667)