Manufacture of mobile fire fighting appliances, vehicles for elimination of consequences of technical and enviromental disasters, containers, fittings and fire accessories.
KHA 20/2000/120 - M 1 Z Mercedes-Benz ATEGO 1322 4x2
The KHA 20/2000/120 M 1 Z Mercedes-Benz ATEGO 1322 4x2 Multipurpose Fire Fighting Vehicle is designed to carry a fire brigade crew (1+2) with accessories necessary for fire fighting interventions with application of water, foam or powder. It can be successfully utilized in both the common fire service and the chemical works, in stores of flammable liquids, and wherever a high risk of fire exists.
It is a fire fighting vehicle of on-road category, designed for operation mainly on metalled roads, weight class M. The purpose-built superstructure is equipped with centrifugal water pump, water tank, foam concentrate tank, powder extinguishing system, rapid intervention equipment and roof-mounted monitor.
TECHNICAL DATA
Vehicle dimensions| Length | 7 030 mm |
| Width | 2 520 mm |
| Height at curb weight | 3 200 mm |
| Ground clearance at G.V.W. | 200 mm |
Vehicle weights
| Service weight | 9 200 kg |
| Gross vehicle weight | 13 500 kg |
CHASSIS
| Type | Mercedes-Benz ATEGO 1322 |
| Engine type | Diesel, supercharged, water-cooled engine |
| Engine output | 160 kW/2 200 min-1 |
| The engine complies with EURO 4 emission standard. | |
| Drive | 4x2 |
| Gearbox | mechanical, six-speed, synchronized gearbox |
| Brake system | double-circuit air system, ABS, ASR |
| Electrical system voltage | 24 V (2 batteries of 12 V 140 Ah) |
| Fuel tank capacity | (Diesel / AdBlue) 130 l / 8 l |
| Maximum vehicle speed | 100 km/h |
CAB
| Type | forward control, tilt cab |
| Number of seats | 1 + 2 |
SUPERSTRUCTURE
| Material | aluminium profiles, aluminium plate panelling glued-on |
TANKS
| Water tank capacity | 2 000 l |
| Foam concentrate tank capacity | 200 l |
| Powder extinguishing system | 500 kg |
PUMPING EQUIPMENT
Low-pressure
| Rated water flow rate | 2 000 l/min |
| Rated working pressure | 1.0 MPa |
| Rated suction lift | 3.0 m |
High-pressure
| Rated water flow rate | 250 l/min |
| Rated working pressure | 4.0 MPa |
HOSE REEL
| Hose dimensions | DN 25/60 m |
| Branchpipe | gun type, allowing to control flow rate and discharge cone |
| Rated flow rate | 200 l/min |
| Rated pressure | 4.0 MPa |
POWDER EXTINGUISHING SYSTEM
| Extinguishing agent | ABC powder |
| Gun typu nozzle flow rate | 2.5 kg.s-1 |
| Throw range | 6 m |
OPTIONS
- superstructure made of glass fibre reinforced polyester
- THTronic electronic foam proportioning control system
- fire pump with 1500 l/min flow rate at 1.0 MPa
- additional hose reel with DN 25/60 m hose and gun type branchpipe
- front nozzles for fire fighting on the run
- towing equipment for trailer
- electric recovery cable winch
- light mast
- electric generator
- four-section extension ladder 12.5 m
Technical modifications reserved. 11/2009
(7043.11)
