
The CAS 30 – T 815-7 6x6.1 Water Tender is designed to carry a fire brigade crew (1+3) with accessories necessary for fire fighting interventions with application of water or foam using the low or high water pressure.
| Length (without cable winch) | 9 190 mm |
| Width | 2 550 mm |
| Height | 2 850 mm |
| Ground clearance below axle | 360 mm |
| Fordability | 1 200 mm |
| Ground clearance can be changed within the range +90 mm / -120 mm during travel by adjusting the air pressure in bellows air springs of all half-axles. | |
Vehicle weights
| Service weight | 14 750 kg |
| Gross vehicle weight | 25 000 kg |
| Type | TATRA T815-731R32/411 |
| Engine type | Diesel, supercharged, air-cooled engine |
| Engine output | 325 kW/1 800 min-1 |
| The engine complies with emission standard EURO 5. | |
| Drive | 6x6 with engageable front axle drive |
| Gearbox | mechanical with semi-automatic electronic shifting, 14 forward gears, 2 reverse gears |
| Brake system | four independent systems, ABS |
| Electrical system voltage | 24 V (2 batteries of 12 V 180 Ah) |
| Fuel tank capacity | (Diesel / AdBlue) 2x 220 l / 67 l |
| Maximum vehicle speed | 100 km/h |
| Type | forward control, tilt cab |
| Number of seats | 1 +3 |
Material: frame made of aluminium profiles and covered with aluminium plates glued-on.
| Water tank capacity | 9 000 l |
| Foam concentrate tank capacity | 540 l |
Low-pressure
| Rated flow rate | 3 000 l/min |
| Rated working pressure | 1.0 MPa |
| Rated suction lift | 3.0 m |
High-pressure
| Rated flow rate | 300 l/min |
| Rated working pressure | 4.0 MPa |
| Hose dimensions | DN 25/60 m |
| Branchpipe | gun type, allowing to control flow rate and discharge cone |
| Rated flow rate | 200 l/min |
Technical modifications reserved. 10/2009
(3796)