
The CAS 30 - Mercedes-Benz ACTROS 1836 AK 4x4 Water Tender (CAS EN 1846-1 S-2-3-5000-10/3000-1) is designed to carry a fire brigade crew with accessories necessary for fire fighting interventions with application of water or foam using the low or high water pressure.
| Length (without cable winch) | 7 000 mm |
| Width | 2 550 mm |
| Height | 3 450 mm |
| Ground clearance below axle | 325 mm |
Vehicle weights
| Service weight | 11 850 kg |
| Gross vehicle weight | 18 000 kg |
| Type | Mercedes-Benz ACTROS 1836 AK 4x4 |
| Engine type | Diesel, supercharged, water-cooled engine |
| Engine output | 265 kW/1 800 min-1 |
| The engine complies with EURO 5 emission standard. | |
| Drive | 4x4 with engageable front axle drive |
| Gearbox | mechanical, 16 forward gears, 2 reverse gears |
| Brake system | double-circuit air system, ABS |
| Electrical system voltage | 24 V (2 batteries of 12 V 165 Ah) |
| Fuel tank capacity | (Diesel / AdBlue) 300 l / 35 l |
| Maximum vehicle speed | 100 km/h |
| Type | forward control, tilt cab |
| Number of seats | 1+2 |
| Material | frame made of aluminium profiles and covered with aluminium plates glued-on |
| Water tank capacity | 5 000 l |
| Foam concentrate tank A capacity | 400 l |
| Foam concentrate tank B capacity | 100 l |
Low-pressure
| Rated flow rate | 3 000 l/min |
| Rated pressure | 1.0 MPa |
| Rated suction lift | 3.0 m |
High-pressure
| Rated flow rate | 250 l/min |
| Rated pressure | 4.0 MPa |
| Hose dimensions | DN 25/60 m |
| Branchpipe | gun type, allowing to control flow rate and discharge cone |
| Rated flow rate | 200 l/min |
- superstructure made of glass fibre reinforced polyester
- THTronic electronic foam proportioning control system
- monitor
- additional hose reel with DN 25/60 m hose and gun type branchpipe
- front nozzles for fire fighting on the run
- towing equipment for trailer
- electric recovery cable winch
- light mast
- electric generator
- four-section extension ladder 12.5 m
Technical modifications reserved. 04/2009
(7041.96)